SHOPPING AREA LINKS

[ BATTERIES ][ BODIES & PAINTS ][ CHARGERS ][ DISCHARGERS ][ ELECTRICAL PARTS ][ ELECTRONIC SPEED CONTROLS ]

[ MODEL KITS ][ MODEL PARTS ][ MOTORS ][ MOTOR PARTS ][ OFF-ROAD TIRES ][ PINIONS, SPURS & MISC. GEARS ]

[ PIT STATION TOOLS & PRODUCTS ][ RADIO SYSTEMS & SERVOS ][ SERIOUS PIT EQUIPMENT ]

[ SHOP SERVICES ][ TEAM LOSI CLOSEOUT SALE ][ USED EQUIPMENT ][ WHEELS OR RIMS ]

(Pictures downloading. Please be patient. Page continually under construction)

SERIOUS PIT EQUIPMENT

This is the section of our store dealing with the Pro-Level pit equipment that factory drivers have and all serious R/C racers want to have, but cringe at the cost to get. For those of you (Like me) R/C crazy enough to shell it out to get some of these items, please continue.


Fantom Racing "Facts Machine" Dyno

Item: F-620A

I have been using one of these to break-in, test and tune motors for years. I have it connected to an old Desktop Computer and run it with a 12 volt automobile battery being kept continually charged by a 30-Amp Bulldog Power Supply with a Variable Output front. The Bulldog keeps the 12-volt battery charged like a camper system does and helps with the load from the Dyno. It is always ready for motor work. The unit comes with a carrying case and DOS software for portable use. There is also a nice new Windows version of the operating software available. I use this in my shop. Click here for more information on Facts II Windows Dyno software: decCo Software's Facts Machine II Software Announcement 

OPERATIONAL FACTS

The "FACTS Machine" measures torque, RPM, and amps, then uses these inputs to compute power. Plots of these variables are available both in relation to each other as well as in relation to time. Portability, IBM compatibility, and ease of operation make the "FACTS Machine" a SUPER tuning tool. Graphs shown on the screen have been formatted to be accurate within the limits of your screen resolution, and show tick marks along the axes for easy readability.

This software package will run on any IBM or Compatible PC with a minimum of a 286 processor, 640k of machine memory, and a VGA or better video card. The preferred setup would be a 286-12mhz computer with a math CO-Processor, and a VGA color monitor to display the color overlays. You need one Comm port open for the dyno to plug into, and Laptop computers work very well, but you will have trouble seeing the overlay files, and some Laptops can't display the high resolution graphics, so a lower resolution screen will be displayed.

Fantom Racing

Facts Machine

Dyno With Case

DOS Version

Item: F-620A

Unit Price: $550.00

WINDOWS VERSION

Item: F-621

Unit Price: $610.00

WINDOWS FACTS SOFTWARE

Item: F-621WCD

Program Price: $74.95

EXAMPLE OF INFORMATION ON GRAPHS BELOW


HOT NEW PRODUCT!!!

P-936 Soldering Station By Hakko

A hot item Racers! As I write this, I have had one for less than a week and am wondering how I got by without it before. I am going to save so much time compared to those bulky and awkward 260 watt gun units I have used for years. Before now, I didn't think a 50 watt iron would be hot enough to handle properly soldering battery bars and such to cells. I figured that by the time a 50 watt iron would solder a bar to the negative end of a cell, that cell would be damaged so bad by overheating you might as well toss it. This is not the case with this unit. To give you an example, I generally like to glue my cells together using a bead of Shoe Goo or a similar product. I do this while placing the cells in my assembly jig before soldering on bars & wires. Others like to tape them together, but I think the glue makes a nicer pack. Taped packs are easier to disassemble. You just pull off the tape, heat to one end of a battery bar and the cell falls right off. On a glued together pack, the whole bar needs to get hot enough to drop straight off on both ends (so the cells can be snapped apart) without overheating and damaging the cells. This 50 watt iron was able to drop bars off for me with more ease than my 260 watt gun! An important note: The stock tip was designed for more delicate work. To be sure you have what is needed for R/C, I have included an optional screwdriver ended tip. This is a high quality unit with many smart features. Enjoy!

    Comes Standard with Base, Holder, Sponge and Handle with Pointed Tip. I have also included a flat spade tip with each unit in this price so it is fully ready to service your R/C needs! The flat tip works better for building battery packs and other heavy applications. The Black color unit is our stocked product.

HAKKO P-936

SOLDERING STATIONS

 

FEATURES

-DESIGNED FOR CONTINUOUS PRODUCTION SOLDERING. ESD SAFE. 60 WATTS.
-ADJUSTABLE TEMPERATURE DIAL WITH LOCK.
-SIMPLE TIP TEMPERATURE CALIBRATION.

-SUPER QUICK HEAT & LIGHTNING FAST RECOVERY.

 

HAKKO P-936

W/900L FLAT TIP INCLUDED

Item: HAK936-13/900L

Unit Price: $110.00

 

TEAM COBRA

COBRA PRO COMM LATHE

DIAMOND BIT INCLUDED

MODEL # 200WD

Every serious racer needs to have one of these!

  • Accurate within .0002".

  • Crank conveniently located opposite the motor for better handling.

  • Anodized to eliminate oxidation/corrosion.

  • Upper handle calibrated in .001" for easy depth adjustment

  • Wide base for added stability.

  • This version includes Power Base to hold on-board Cells to run unit.

  • Minimal assembly.

  • Easy, adjustable cutting stop.

  • Teflon way shims to assure the smoothest possible operation.

  • lightweight and portable.

  • Increases motor Life 3-4 times, improves motor performance.

  • Optional diamond cutting bit included in this version.

ProCom Lathe With Power Base

And Diamond Cutting Bit

Unit Price: $179.99

 

 

Hit Counter

SHOPPING AREA LINKS

[ BATTERIES ][ BODIES & PAINTS ][ CHARGERS ][ DISCHARGERS ][ ELECTRICAL PARTS ][ ELECTRONIC SPEED CONTROLS ]

[ MODEL KITS ][ MODEL PARTS ][ MOTORS ][ MOTOR PARTS ][ OFF-ROAD TIRES ][ PINIONS, SPURS & MISC. GEARS ]

[ PIT STATION TOOLS & PRODUCTS ][ RADIO SYSTEMS & SERVOS ][ SERIOUS PIT EQUIPMENT ]

[ SHOP SERVICES ][ TEAM LOSI CLOSEOUT SALE ][ USED EQUIPMENT ][ WHEELS OR RIMS ]